Posts Tagged ‘WHEELS’

Winter tyres

The ordinary tyres when compared to winter tyres fail in situations where the car is held up in a driveway filled with snow. Winter tyres on the other hand transform the car and make them usable even in extreme conditions such as sleet, rain, snow, dry, slush, up hill and down dale.
One should never take liberties with the functioning of tyres. While driving on black ice the safety is of utmost importance and since in UK it almost snows for the most part of the year the need for finding a winter tyre increases even more. Taking this fact into consideration the tyre manufacturers in UK have started making extra tyres but over the past few years the demand has far exceeded the supply.

Legalities of tyres

There are two options either to pay a fine for making use of illegal tyres or pay out for the tyres so that they are safe and legal. The law is in place, which has certain guidelines that everyone has to comply with in relation to their car tyres.

The driving of damaged or worn out tyres can result in the fine or result in
MOT failure. It may even affect the insurance policy of the car as well. The legal issues need to be resolved but the most important thing is to stop using the damaged or worn out tyres as they endanger the lives of its users.

The car has to be maintained at peak performances and the easiest way is to maintain proper tyres by regularly keeping a check on formation of lumps or bumps or any kind of wear and tear that occur due to the separation or partial structural failure.

The cut or tear should not exceed the length of 25mm or 10 % of the tyre’s width else the tyre needs to be replaced with a functional one as deep cuts may cause damage to the tyre’s inner cords. The tyre’s internal plies should be protected from outside exposures. And any tyre that is being fitted to the vehicle should be compatible with tyres of other wheels. One should ensure that the tyre used in the car or trailer is of permissible standards and doesn’t cause damage to the road as well as its passengers.

The legal tyre maintenance suggests that all car tyres ought to be puffed up to accurate air demands as per the recommendation of car manufacturer or tyre manufacturer. Some tyres require to be maintained at partially inflated state.

The officially permitted tread deepness of 1.6mm is the minimum requirement for car tyres. This tread depth should be throughout a continuous band in the center ¾ of the tread and around the entire circumference. The said tread depth is mandatory and the minimum legal requirement wherein the original tread pattern must be visible as well.

Carrying of spare tyres is neither mandatory nor having a spare tyre is illegal. But the spare tyres should always comply with the legal standards.

The biggest risk of making use of damaged tyres in cars or trailers is that they are a dangerous proposition for the passengers within the vehicle as well as other people and vehicles on the road. The use of illegal or damaged tyres is punishable under the law.

The traffic police can issue Fixed Penalty notices to such offenders. In case the offenders don’t comply with the charges they can be prosecuted and even arrested. The legal notices are issued in the name of driver as well as the owner, incase he/she not the same person.

A court can compel fines up to a maximum of $2,500 and three penalty points. If a car has added flawed tyre, a directive can be issued for each prohibited tyre.

Certain circumstances require total disqualification.

Effects of pressure variances in tyres

Since the day the tyre was invented or more precisely rediscovered as in way the tyre is simply a wheel that has been remodeled to adhere to the modern means of transports. The tyre that is being used today has undergone a lot of changes from the time they were introduced for the first time. The scientific growth aided by technological developments has blended with growing needs of the customer to improve the performances of tyres manifolds.

The following are the areas, which get affected due to pressure variances in the tyres:

 Braking distances
 Fuel economy
 Gripping on the road in normal conditions and on bends
 Wet weather driving conditions

Tyres that are either balding or have been improperly inflated tend to reduce the grip of the wheels on the surface of the roads. The tyres tend to buckle slightly out of shape due to the application of wrong pressure and this may result in the vehicle to become unbalanced and harder braking could lead to tilting of the vehicle to a particular side.

Lower tyre pressures lead to the use of extra force for physically moving the car and this cause more fuel to be burned to keep the car moving. For shorter distances this is not a big issue but incase one is on long drive the prospect of burning more fuel is a nightmare as one has to pay for the petrol and it is a matter of concern.

The gripping of tyres under normal circumstances is greatly reduced due to presence of less air pressure in tyres. The risk is increased in bends as this may escort to deadly penalty. The lack of pressure in tyres causes the tyre to be pushed at a greater angle then they should actually be moving to. The entire scenario is that the area of tread is off the road slightly on one side and bottom of the sidewall is being used as exterior tyre on the supplementary. The loss in grip will considerably reduce the steer of the vehicle.

And finally the wet weather conditions are too harsh and require the tyres to be in perfect condition. Any sort of air pressure variances in the tyres can cause lot of damages. The tyres are provided with tread pattern to move the water away from under the front of the tyre to its sides without it having to go underneath.

If the tyre has water underneath it the surface of the tyre losses contact with the road and this phenomenon is called aquaplaning. Lower air pressures in tyre reduce the effect of treads and the tyres have a greater tendency for to lose grip in wet weather.
Aquaplaning is a severe consequence where the tyre has no grip on the road surface and the minimization of this phenomenon is key to safety. Tyres are provided with treads for negating the effect of aquaplaning but overused tyres or balding tyres tend to have less treads leading to loss of grip in wet road surfaces.

Cross Ply tyres versus Radial Ply Tyres

Cars make use of the radial tyres entirely but the ones fitted to motorbikes retain the cross-ply form of construction and even the tyre engineers state that radial tyres are not appropriate for motorbikes. This is in fact quite right as cars and motorbikes are very different and should have different tyre requirements. However, of late the radial tyres are considered to have benefits to offer to motorbikes as well.
Several piles of cord are laid on top of each other at a bias angle of 40 to 50° to make a cross ply tyre. This consequence in the creation of a cross at an direction of 80 to 100°. The layered and angled structure of ply tyres results in the tread not reacting in exact symmetry to that of the loads applied.
The symmetry is completely lacking in cross ply tyres and this can cause the tyre to run to one side nonetheless while rolling on a completely level and even surface. This effect is known as “Ply Steer”. The cross manufacture of the carcass efficiently forms parallelograms of thread imbedded in the rubber, this is not a sturdy form of construction and under driving or braking torque, upright load and centrifugal sound effects these parallelograms deform, which allows squirming of the contact area and tyre toss or diameter enlargement at elevated pace, reducing constancy and heating the tyre. Such heating eventually manifests itself as amplified rolling conflict.
By simple observation one can conclude that radial tyres create a greater and wider area of impression compared to the cross ply tyres. Such a fact highlights that radial tyres have better grip than cross ply tyres. Again in loaded conditions the radial tyres outscore the cross ply tyres as they have larger contact area with the surface of the road as they the tendency to become littile bit flat which is not the case in cross ply tyres.
Radial tyres contain less plies that is generally confined to one or two than the cross ply tyres that require three to four plies, so as to have greater flexibility in sidewalls. To maintain the entire tyre stiffness the reduction of sidewall height is required and thus results in lower profiles of 50 to 70 %. On the other hand the cross ply tyres make use of 90 to 100% of the profile. The lower profiler is an indication of having smaller diameter. The cross ply tyres have larger diameters in comparison to radial tyres of the same size. This trend contributed to the growth of 17” wheels while leading to the decline of the popular 16” wheels.
In the year 1984 radial tyres were introduced for the first time. The bias belted tyres were the most commonly used tyres until then. The cross-ply tyres were the next in line of production, which added circumferential belt plies. As and when the developments took place the older technology got replaced with newer ones giving way to improved tyre strength, agility and overall performances.

Properties of tyres

Tyres are an integral element in any bike and their main function is to transmit all the forces amid the bike and road. The properties of tyre are one aspect that is better if it remains constant. The tyres are the key to the handling properties of bikes. The vehicle manufacturers specify the properties of the tyres that are provided along with the new bikes.

But the same cannot be said about the after market tyres which are completely different from the original tyres. Even if they may be similar in design their handling characteristics can differ a lot since the forces generated between the tyres and the ground will determine the machine’s behavior.

The engineering involved or the sophisticated designing and fabrication in manufacturing of tyres is always hidden from the users due to the simplicity and multitude of tasks they are able to achieve. The earliest versions of pneumatic tyres were used for increasing the comfort level and decrease the load on wheels. The modern day bikes make use of suspension systems but it is the tyres that are responsible for absorbing the initial shocks from road.
The various criteria depending on which the tyre has to be chosen depends on:
 Driver’s safety
 Handling
 Comfort
 Service life
 Economy
 Environmental compatibility
Ensuring the driver’s safety is of prime concern and this is achieved by letting the tyre to sit firmly on the rim. Such an arrangement is possible by implementation of a special bead design and making use of safety rim.

Handling of tyres is also a key feature that allows one to make decisions based on the type of vehicle they will use. Smaller vehicles should be provided with thin tyres for better handling and larger ones such as cars or trucks may need broader and bigger or smaller tyres to achieve the same.

Compromising on the comfort by going for style is never advisable. Lean and thinner varieties of tyres may be quite appealing to use but one should tread with caution and always look for tyres that are recommended by the manufacturer and should not opt for cheaper variants as well.

The tyres come with a shelf life that is mentioned by the manufacturer and one has to take care to purchase tyres that have longer shelf life and only buy the original ones to avoid problems related to its cheaper variants. Tyre manufacturers also offer free services for increasing the longetivity of the tyres and repair some of the minor wear and tear too.

Inexpensive tyres

Numerous people have derived various dollars saving schemes, and distinctive methodologies of conserving capital and that is exceptional since if more individuals start doing so there is greater hope for all and sundry. A unique strategy of the various available means is through the conservation of fuel of the car or truck.

The preliminary step is to preserve up with the wheel alignment. Quite a number of content articles may have been published about wheel alignment, but it is now very significant than one could have ever imagined before. If the alignment is out then the vehicle is in fact fighting itself in disagreement to the steering.

If the tyres appear to be unevenly worn then one will need to get their car checked out by a mechanic as a matter of fact the wheels created have to have proper alignment. Uneven put on is the best sign which indicate that the wheels are not accurately aligned.

Improper alignment has an effect on the dealing with of the vehicle and increases fuel usage. Of course this will enhance your cars and trucks fuel consumption, so one should get their car or truck effectively aligned.

Up coming factor to do is to maintain clean oil in the vehicle’s engine. This enables in preserving the motor and working a lot more efficiently and thus minimizes the volume of fuel burned off. It is notable that diesel engines need their oil transforming significantly more than the petrol engines this is a stage that requires observation as again this saves fuel expenditures.A further step is to preserve the air conditioning and keeping it switched off whenever not necessary.

Air conditioning can enhance the fuel consumption considerably by 10%. If one is travelling at over sixty mph in midsummer it would be a lot more fuel efficient to have the air conditioner on than keeping open the windows simply because of the drag impact.

Although it may turn up obvious to some proper driving speeds also have an affect on fuel consumption. Going too quick and using the improper gears has an adverse have an affect on the fuel intake. Driving carefully significantly lessens fuel usage and it’s better to keep” foot off gas”.

It is very essential to keep the windows closed. By letting windows open can cause drag, which decrease the fuel efficiency and thus increases expenditures.
Even overloading also has an adverse impact on the fuel performance. Maintaining the auto at its lowest capacity is a good option. Clearing away of objects from the car or truck that can add excess bodyweight, like as roof racks can be tried out as well.

The most critical and quickest means is to keep the tyre pressures checked at regular intervals. Most beneficial garages and automobile centres are as well ready to test the tyres and the tyre pressures.

It is suggested by experts that one verify the tyres regularly. Individuals seldom are likely to check out their tyres until and unless they have their motor vehicle MOT carried out. But one can check the tyres on their own.

Cheap Tires for Sale

Cheap Tires for Sale

Cheap tires for sale do not have to be poor quality tires that will not last as long or keep you as safe as the higher priced tires for sale online and in retail stores around the country. You can get the same name brand tires that you know and trust for far less from a company that prides itself on over 30 years of serving customers in an ethical manner.

Cheap tires for sale include name brands such as BF Goodrich, Michelin, Pirelli, Bridgestone, Kumho, Falken, Goodyear, Continental, Hankook and Nitto. These tires also come in a wide selection, including high performance tires and wheels, extreme off road tires and wheels and your average garden variety tires for the family car or mini van.

Cheap tires for sale and high quality yet inexpensive wheels can be purchased online safely and securely. There are frequent special sales that will allow you to save even more money by shopping online for tires and wheels. There are options for high performance vehicles as well as every day drivers. The quality of the tires is just as good as the tires you pay full price for.

Cheap tires for sale can be safe for you and your family to drive on. You do not have to sacrifice quality to get an affordable price. If your tires are not in good shape, that is dangerous. When you are shopping for new tires be sure to take a look at the spare tire in your trunk. Is it properly inflated? If not, it will do you no good if you have a blow out on the side of the road.

Cheap tires for sale can include a new spare tire so that you will be safe when you are driving at night or far away from home. With all new tires and a brand new spare tire on board, you will be ready for all of your travels. Rain, snow, extreme heat and other weather worries will not be a problem. You can face them knowing you have a good set of tires to get you there and home safely.

Cheap tires for sale online are from a reputable company that has a knowledgeable, friendly sales staff ready to help you with your tire and wheel needs. You can do all of your shopping online if you choose, but if you decide that you need a staff member to assist you or answer your questions they are just a phone call away.

Cheap tires for sale will save you money without sacrificing safety and quality. Cheap tires for sale online are the easiest way to make your purchase. Browse the selection online, take a look at the special offers for additional savings and make your safe, secure transaction online. If you decide you need more help, the phone number is available online.

They accept all major credit cards and now they accept payment by PayPal as well. It has never been easier to shop for quality cheap tires for sale. For more information please Visit: Budget tyres

Discounttires.com is an on line retailer with the lowest prices on tires and wheels, carrying all name brands and a huge inventory.  1-2 day delivery guaranteed, in most cases.

More Cheap Tires For Sale Articles